x and y can be equal to 1..
If so,then he gets 1/1 of Rs.10 which is equal to 10 and
again 1/1 of Rs.10=Rs.10..so,he gets total of 20..and
returns 20..so,no gain and no loss..
If x=1,y=2,he gets, 5+20=25..and returns 20..so he may not
lose..
So,whatever be the values of x and y,only these two answers
are possible..
so its a)He never loses..
a printer produced 176400 lines in 420 minutes
it produces 176400/420 lines per minute = 420
answer is : 420 lines per minutes
c
Answer: 5400
Explanation:
100x + 400 = 12(x – 5)
x = 50
100 * 50 + 400 = 5400
2a; 2a+2; 2a+4; 2a+6; 2a+8; 2a+10
t_2 + t_6 = 24 => 2a+2 + 2a + 10 = 24 => a = 3
therefore t_4 = 2(3) + 6 = 12
64
Take one screw out from the rest of the three tyres and put the screws in the fourth tyre. Now all tyres will be held by three screws each.
2nd
500 ways
trick
(r/10)*(r/10)
(20/10)*(20/10)
4% decrese
– While the train is moving, the jogger will also be running in the same direction.
– for the head(engine) of the train to get to the current position of the jogger 240m away, it will take:
45km/hr => 12.5m/s => 240/12.5 = 19.2 seconds.
– But in the same period of time, the jogger will still be running and will have moved to a new location by: 9km/hr => 2.5m/s => 2.5 * 19.2 = 48m
To get to the new location at the speed of 12.5m/s will take the train:
48/12.5 = 3.84sec
In this additional time, the jogger will move forward by:
3.84 * 2.5 = 9.6m
at a speed of 12.5m/s, it will take the train less than a second to cover the additional 9.6m
If we add the distance the jogger will cover in 1 second to 9.6, it is still less than what the train can cover per second. let us see (9.6 + 2.5 = 12.1)
Therefore, the head of the train will pass the runner at approximately: 19.2 + 3.84 + 1 => 24.04 seconds.
For the train to completely pass the runner, it will need its whole length of 120m to be in front of the runner.
This will take an additional (9.6 + 2) seconds.
Therefore for the length of the train to be ahead of the runner it will take approx. 35.65 (24.04 + 9.6 + 2) seconds
half and hour
It is due to the counter clockwise motion of the motor. The motor rotates in the counter clockwise direction the blades of the fan are attached to the motor hence the blades rotates in the anti clockwise direction. So it is due to the motor rotation the fan rotates in counter clockwise direction.
20 %