Al majal service master Interview Questions, Process, and Tips

Question does not clarify if its simple interest or compound interest

4) QEOKTWG

s=36kmph
in meter per second is=36*5/18=>10

1:2

15 min 100 line
30 min 200 lines + 15 min rest total 45 min +5 min think +5 min write + 5 min rest
250 line code will be done

L*I/3(I-H)

(d) none of these.

5 is the answer….
Remaining all are the multiples of 3 expect 5

d

Total distance to cover = 132 +110 = 242m
Speed = 72kn/hr = 20m/s
time = 242/20 = 12.1 sec.

128

consider the tank capacity as 90 litres.
to fill the tank in 3 hrs first pipe must flow at a rate of 30 litres/hr
2nd pipe has to flow at a rate of 45 litres/hr
if two pipes are opened at a time the flow rate will become 75 litres/hr
90/75= 6/5 = 1.2= (i.e) 1hr and 12 minutes 1 1/5 hr

Here is the solution to the given version of the puzzle (9 balls, one is heavier, need to identify oddball), where we label the balls A, B, …, I:

1. Weigh ABC versus DEF.

Scenario a: If these (1) balance, then we know the oddball is one of G, H, I.

2. Weigh G versus H.

Scenario a.i: If these (2) balance, the oddball is I.

Scenario a.ii: If these (2) do not balance, the heavier one is the oddball.

Scenario b: If these (1) do not balance, then the oddball is on the heavier side. For simplicity, assume the ABC side is heavier, so the oddball is one of A, B, C.

2. Weigh A versus B.

Scenario b.i: If these (2) balance, the oddball is C.

Scenario b.ii: If these (2) do not balance, the heavier one is the oddball.

answer is maximum of 2.

suppose
pipe:
A -30 hours A’s effeciency (60/30) =2
60( lcm of 30 and 20)
B- 20 hours B’s effeciency (60/20)=3

time taken by both to fill = 60/5 =12 as given in question (effeciencies of both a+b =2+3=5)
time taken by faster pipe i.e b = 60/3 =20

P Q R S

TP -> UQ -> RV -> SW

Answers-

U sits opposite to S

Q sits in between S and R (after interchange)

To determine how many consecutive zeros the product of S will end with, we need to find the highest power of 10 that divides the product. This is equivalent to finding the highest power of 5 that divides the product, since the number of factors of 2 will always be greater than the number of factors of 5.

The primes in S are {2, 3, 5, 7, 11, 13, 17, 19, 23, 29, 31, 37, 41, 43, 47, 53, 59, 61, 67, 71, 73, 79, 83, 89, 97}.

There are 24 primes in S, so the product of S is:

2 x 3 x 5 x 7 x 11 x 13 x 17 x 19 x 23 x 29 x 31 x 37 x 41 x 43 x 47 x 53 x 59 x 61 x 67 x 71 x 73 x 79 x 83 x 89 x 97

We need to find the highest power of 5 that divides this product. To do this, we count the number of factors of 5 in the prime factorization of each number in S.

5 appears once: 5
5 appears once: 25
5 appears once: 35
5 appears once: 55
5 appears once: 65
5 appears once: 85
So, there are six factors of 5 in the product of S. However, we also need to consider the powers of 5 that arise from the factors 25, 35, 55, and 65.

25 = 5 x 5 appears once: 25
35 = 5 x 7 appears once: 35
55 = 5 x 11 appears once: 55
65 = 5 x 13 appears once: 65
Each of these numbers contributes an additional factor of 5 to the product of S. Therefore, there are 6 + 4 = 10 factors of 5 in the product of S.

Since each factor of 5 corresponds to a factor of 10, we know that the product of S will end with 10 zeros. Therefore, the product of S will end with 10 consecutive zeros

Fathers before age=3*before sons age—-(1)
After 2.5 years..
Fathers before age+2.5 years =2.5*sons age—-(2)
Substitute (1) in (2),
3*sons before age+2.5 years=2.5*sons age
0.5*sons age=2.5 years
Sons before age=5years
So current age after 2.5 years,
Sons before age+2.5 =5+2.5=7.5 years